Sony SLV-400 Operating Instructions - Page 28
Recording, Programs
View all Sony SLV-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
1 Recording TV Programs Before you begin, check the following points: • Make sure that the connections have been made correctly (see pages 6 to 14). • Check the input mode indicator in the display window of the VCR. Press INPUT SELECT so that the LINE indicator disappears and the channel number appears in the display window. CAUTION: Television programs, films, video cassettes and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws. Also, use of this recorder with cable television transmission may require authorization for the cable television and/or program owner. Recording TV Programs o ieDC. o, 3 5 1 Insert a cassette. The VCR turns on automatically (auto power on). 2 Turn on the TV. 3 If your TV is connected to both VHF/UHF OUT and LINE OUT on the VCR, select the input for the VCR. 4 If your TV is connected only to VHF/UHF OUT, set the :1 TV to the correct channel (CH 3 or CH4), then press TV/VTR so that the VTR indicator lights up in the display window. Skip this step if your VCR is connected to both the VHF/UHF OUT and LINE OUT. 5 Select the channel to be recorded with CHANNEL +/- or channel number buttons and press ENTER. 6 Select SP or EP with TAPE SPEED (SP/EP) on the Remote Commander. To select the best recording tape speed, see "Maximum recording time of a cassette" on page 24. 7 Press the two • REC buttons on the Remote Commander at the same time, or the • REC button on the VCR. To stop recording: Press • STOP. To pause the cassette: PressII PAUSE. To resume recording, pressII PAUSE. When the recording pause mode lasts for approximately 5 minutes, the VCR enters the stop mode. When the cassette reaches its end: The cassette rewinds to the beginning and the power remains on. 28 Basic Operations