Sony SLV-400 Operating Instructions - Page 44
General, Setup, Information
View all Sony SLV-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
General Setup Information Setting the RF Unit 1 RF UNIT ttit; I o t CA fi 1>1 Why this setting is necessary: You must set the RF UNIT selector at the rear of the VCR properly so that your TV can receive the correct signal from the VCR. Set the selector to CH3 or CH4, whichever is not active in your area. If you connect a TV or color monitor equipped with A/V input jacks, skip this adjustment. 1 Set the RF UNIT at the rear of the VCR to CH3 or CH4, whichever is not active in your area. 2 Press POWER. The power indicator lights up in the display window. 3 Press TV/VTR so that the VTR indicator lights up in the display window. 4 Check that the channel number indicator appears in the display window, then select an active channel in your area by pressing CHANNEL +/-. 5 Turn on your TV and set it to the channel you selected in step 1. Your TV is now tuned to the VCR. Whenever you use the VCR, set the TV to the preselected channel. NOTE: For details on adjusting TV channels, see your TV instruction manual. 44 Additional Information