Sony SLV-400 Operating Instructions - Page 20
Presetting, Active, Channels
View all Sony SLV-400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Presetting the Active Channels This VCR is capable of receiving VHF channels 2 to 13, UHF channels 14 to 69 and CATV channels 1 to 125. These channels can be preset using the Remote Commander and the TUNER PRESET display. First, we recommend that you preset the active channels in your area using the automatic preset mode. Then, if there are any unwanted channels, disable them manually. If you have already decided which channels you wish to preset on the VCR, set them directly using the channel number buttons. Before presetting channels, check the following points: • Turn ON the VCR and the TV. • If you have connected the TV and the VCR using the VHF/UHF OUT on the VCR only, make sure that the TV is set to the correct channel (CH 3 or CH 4) for the VCR. If you have connected the TV and the VCR using the LINE OUT, select the input for the VCR. • Press TV/VTR so that the VTR indicator lights up in the display window on the VCR. • Press INPUT SELECT so that a channel number appears in the display window on the VCR. Presetting All Receivable Channels Automatically ' -:071:••• - oD 000 000 0 eti 5K5 5 -5 drab 575-5- 5±5 O 2 Press • or • to move the cursor (II.) to TUNER PRESET. MENU TiMER SET/CHECK • TUNER PRESET CLOCK SET 3 Press EXECUTE. The TUNER PRESET menu is displayed. TUNER PRESET NORM/CATV AUTO PRESET • MANUAL SET AFT FINE TUMNG CH 2 • NORM CATV • ADD ERASE •ON OFF STOP • - 1 Press MENU. The main MENU appears. MENU • TIMER SET/CHECK TUNER PRESET CLOCK SET 4 Press • or • to move the cursor to NORM/CATV. TUNER PRESET • NORM/CATV AUTO PRESET MANUAL SET AFT FINE TUNING CR 2 • NORm CATV • ADO ERASE • ON OFF 20 Preparation