Sony SLV-575UC Operating Instructions - Page 19
Adjusting
View all Sony SLV-575UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Adjusting a TV RF UNIT 3CH 4CH I® C)(:)0 0 0 0 0 rdf 2 3 If you have connected your VCR and TV via antenna terminals only, either channel 3 or 4 must be selected on your TV to receive the signal from the VCR. To get the proper RF signal, set the RF UNIT selector on the rear panel of the VCR. If the connection between the VCR and TV has been made via video/audio jacks, skip this step. 1 Set RF UNIT to 3 CH or 4 CH. If channel 4 is active in your area, set the selector to channel 3, and vice versa 2 Press POWER. The indicator lights. 3 Press ANT TV/VTR so that the VTR indicator lights. 4 Check that the TUNER indicator appears in the display window, then select an active channel in your area by pressing CHANNEL + /-. 5 Turn on the TV and select either VHF channel 3 or 4 whichever was set on RF UNIT. The TV program selected on the VCR appears on the TV screen. Your TV is now tuned to receive the signal from the VCR. Whenever you use the VCR, select the channel you choose above on the TV. Note For details about TV channel setting, see the instruction manual of the TV. 19