Sony SLV-D500P Operating Instructions - Page 30
If you made Hookup 3 Enter the cable box output channel, on your TV and VCR, then press
View all Sony SLV-D500P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
3 Press V/v to select "Guide channel setup," then press ENTER. 4 The upper row shows VCR Plus+ guide channels and the lower row shows TV channels or cable box out put channels. Press B/b to select the channel number that does not match the guide channel. 5 • If you made Hookup 1 (page 14) or 2 (page 16): Enter the actual number on your TV (and VCR), then press V/v. • If you made Hookup 3 (page 18): Enter the cable box output channel (usually 2, 3, or 4), then press V/v. 6 Repeat steps 4 and 5 for each channel number that does not match. 7 Press O RETURN to confirm the setting. 8 Press O RETURN repeatedly to exit the menu. 30 Setting up the VCR Plus+® system
30
Setting up the VCR Plus+
®
system
3
Press
V
/
v
to select “Guide channel setup,”
then press ENTER.
4
The upper row shows VCR Plus+ guide channels and the lower row shows
TV channels or cable box out put channels.
Press
B
/
b
to select the channel
number that does not match the guide channel.
5
•
If you made Hookup 1 (page 14) or 2 (page 16): Enter the actual number
on your TV (and VCR), then press
V
/
v
.
•
If you made Hookup 3 (page 18): Enter the cable box output channel
(usually 2, 3, or 4), then press
V
/
v
.
6
Repeat steps 4 and 5 for each channel number that does not match.
7
Press
O
RETURN to confirm the setting.
8
Press
O
RETURN repeatedly to exit the menu.