Sony SLV-D500P Operating Instructions - Page 52
To stop recording, To use the DVD-VCR after setting the timer, Press ENTER to confirm the setting. - tv codes
View all Sony SLV-D500P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
7 Press B/b to select the tape speed, Auto, SP, or EP. 8 Press ENTER to confirm the setting. To enter another setting, repeat steps 1 to 7. 9 Press O RETURN to exit the menu. 10 Press ?/1 to turn off the VCR. The timer indicator appears in the display window and the VCR stands by for recording. When using a cable box, leave it on. To stop recording To stop the VCR while recording, press x STOP. To use the DVD-VCR after setting the timer To use the DVD-VCR before a timer recording begins, just press ?/1. The timer indicator disappears from the display window and the DVD-VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter (page 38). • Display tape information on the TV screen (page 40). • Check the timer settings (page 53). • Watch another TV program (page 41). Tip • To check, change or cancel the program setting, see "Checking/changing/canceling timer settings" on page 53. Note • If the VCR does not accept the PlusCode number, this means that: - The PlusCode number is incorrect. - ONCE, MO~FR, or Weekly was selected incorrectly. You cannot select MO~FR or Weekly for a program that airs more than seven days ahead. Correctly set the PlusCode number again from step 2. • When the PlusCode number is incorrect, "Invalid Code" will appear in the display. 52 Recording TV programs using the VCR Plus+® system