Sony SMPN200 Operating Instructions - Page 25
Sony Entertainment Network, Network connection, Control for HDMI BRAVIA - software update
View all Sony SMPN200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Sony Entertainment Network (SEN) The picture/sound is poor/certain programs display a loss of detail, especially during fast-motion or dark scenes. , Picture/sound quality may be poor depending on Internet content providers. , Picture/sound quality may be improved by changing the connection speed. We recommend a connection speed of at least 2.5 Mbps for standard definition video (10 Mbps for high definition video). , Not all videos will contain sound. The picture is small. , Press M to zoom in. The desired wireless router is not detected even if "Scan" is performed. , Press RETURN to return to the previous screen, and try "Scan" again. If the desired wireless router is still not detected, press RETURN to select "Manual registration." The message "A new software version is available. Please go to the "Setup" section of the menu and select "Network update" to perform the update." appears on the screen when turning the player on. , See "Network Update" (page 20) to update the player to a newer software version. You cannot start the PARTY STREAMING function. , Check that "Party Auto Start" is set to "On" in "Network Settings" (page 23). Additional Information Network connection The player cannot connect to the network. , Check the network connection (page 13) and the network settings (page 23). You cannot connect your PC to the Internet after "Wi-Fi Protected Setup (WPS)" is performed. , The wireless settings of the router may change automatically if you use the Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly. You cannot connect the player to the wireless LAN router. , Check if the wireless LAN router is on. , Depending on the surrounding environment, such as the wall material, radio wave receiving condition, or obstacles between the player and the wireless LAN router, the communication distance may be shortened. Move the player and the wireless LAN router closer to each other. , Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or digital cordless device, may interrupt the communication. Move the player away from such devices, or turn off such devices. "Control for HDMI" (BRAVIA Sync) The "Control for HDMI" function does not work (BRAVIA Sync). , Check that "Control for HDMI" is set to "On" (page 22). , If you change the HDMI connection, turn the player off and on again. , If power failure occurs, set "Control for HDMI" to "Off," then set "Control for HDMI" to "On" (page 22). , Check the following and refer to the instruction manual supplied with the component. - the connected component is compatible with the "Control for HDMI" function. - the connected component's setting for the "Control for HDMI" function is correct. ,continued 25