Sony SMPN200 Operating Instructions - Page 26
Specifications, Others - replacement remote
View all Sony SMPN200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
, When you connect the player to a TV through an AV amplifier (receiver), - if the AV amplifier (receiver) is not compatible with the "Control for HDMI" function, you may be unable to control the TV from the player. - if you change the HDMI connection, disconnect and reconnect the AC power cord, or a power failure occurs, try the following: 1Switch the input selector of the AV amplifier (receiver) so that the picture from the player appears on the TV screen. 2Set "Control for HDMI" to "Off," then set "Control for HDMI" to "On" (page 22). Refer to the instruction manual supplied with the AV amplifier (receiver). The System Power-Off function does not work (BRAVIA Sync). , Check that "Control for HDMI" and "HDMI: Linked to TV-off" are set to "On" (page 22). Others Playback does not start from the beginning of content. , Press OPTIONS, and select "Play from beginning." Playback does not start from the resume point where you last stopped playing. , The resume point may be cleared from memory when - you disconnect the USB device. - you play other content. - you turn off the player. The player does not respond to any button. , Replace the battery in the remote with a new one if it becomes weak. , Press the reset button on the bottom of the player. , If the player still does not respond to the reset button, disconnect then reconnect the AC power cord. Specifications Inputs and outputs (Jack name: Jack type/Output level/Load impedance) LINE OUT R-AUDIO-L: Phono jack/2 Vrms/10 kilohms DIGITAL OUT (OPTICAL): Optical output jack/-18 dBm (wave length 660 nm) HDMI OUT: HDMI 19-pin standard connector COMPONENT VIDEO OUT (Y, PB, PR): Phono jack/Y: 1.0 Vp-p/ PB, PR: 0.7 Vp-p/75 ohms LINE OUT VIDEO: Phono jack/1.0 Vp-p/75 ohms LAN (100): 100BASE-TX Terminal USB: USB jack Type A (For connecting a USB memory, memory card reader, digital still camera, and digital video camera) DC IN: 12 V DC Wireless Wireless LAN standard: IEEE802.11b/g/n Frequency range: 2.4 GHz band: Channels 1-11 Modulation: DS-SS Modem and OFDM Modem General Power requirements: AC adapter: 110-240 V AC, 50/60 Hz Power consumption: 11 W Dimensions (approx.): 150 mm × 150 mm × 43 mm (6 in. × 6 in. × 1 3/4 in.) (width/depth/height) incl. projecting parts Mass (approx.): 420 g (14 3/4 oz) Operating temperature: 5 ºC to 35 ºC (41 °F to 95 °F) Operating humidity: 25 % to 80 % 26