Sony SPP-A2770 Operating Instructions - Page 18
To change the home area code, Step 5: Entering the area code continued - phone
UPC - 027242585249
View all Sony SPP-A2770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Step 5: Entering the area code (continued) 4 Enter the three digits of your home area code using the dialing keys. 5 Press (PGM). You hear a long confirmation beep. Notes • If the home area code is already entered, it appears on the display in step 2. To enter a different home area code, see "To change the home area code" below. • Do not allow more than 60 seconds to elapse during the operation procedure. • If the area code has not been entered, calling back from the Caller ID list and storing the Caller ID data into the Phone Directory cannot be performed. • If the home area code is not correctly entered, "ERROR" will appear on the display and five short error beeps will be heard after (PGM) is pressed in step 5. Move the cordless handset closer to the base unit, make sure the base unit* is not in use before you start the setting. * If the system includes additional cordless handsets, it is necessary to stop using them before you start the setting as well. Tips • When you select "(GO BACK)", you can return to the previous set display by pressing Jog Dial. • To check the current home area code, perform steps 1 and 2. The home area code appears on the display for about 60 seconds. To change the home area code 1 Perform steps 1 to 3 on page 17. The current home area code appears on the display. 2 Press (ERASE) to erase the current home area code. 3 Enter a new home area code using the dialing keys. 4 Press (PGM). You hear a long confirmation beep. To erase the home area code You can erase the home area code. Perform steps 1 and 2 above, then press (PGM). The home area code will be erased, and you hear a long confirmation beep. 18US Getting Started