Sony SPP-A2770 Operating Instructions - Page 22
SELECT AM/PM AND, PRESS JOG DIAL, ENTER MIMUTE AND, To check the current day and time
UPC - 027242585249
View all Sony SPP-A2770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Step 6: Setting the day and time (continued) 5 Press Jog Dial. ENTER MIMUTE AND PRESS JOG DIAL 11:00 NEW OLD MASSAGE RING OFF 6 Set the minute (00 to 59) by turning Jog Dial. ENTER MINUTE AND PRESS JOG DIAL 11:01 NEW OLD MASSAGE RING OFF 7 Press Jog Dial. SELECT AM/PM AND PRESS JOG DIAL 11:01AMAM NEW OLD MASSAGE RING OFF 8 Select "AM" or "PM" by turning Jog Dial, and then press Jog Dial. You hear a long confirmation beep. Then the phone starts counting time. Notes • Do not allow more than 60 seconds to elapse during the operation procedure. • "PF" flashes on the message counter when the day and time is cleared due to a power interruption, or when you connect the base unit to the AC outlet for the first time. • If the current day and time are not set, you will not hear a time stamp when you play back recorded messages. • When "ERROR " appears on the display and five short error beeps are heard after Jog Dial is pressed in step 8, move the cordless handset closer to the base unit, make sure the base unit* is not in use before you start the setting. * If the system includes additional cordless handsets, it is necessary to stop using them before you start the setting as well. Tip When you select "(GO BACK)", you can return to the previous set display by pressing Jog Dial. To check the current day and time Press (DAY/TIME) on the base unit. You hear the current day and time by voice guidance. 22US Getting Started