Sony SR60 Handycam Handbook - Page 17
Step 2: Charging the battery pack - installation
UPC - 027242698970
View all Sony SR60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Getting Started Step 2: Charging the battery pack You can charge the battery after attaching the "InfoLITHIUM" battery pack (P series) (p.120) to your camcorder. • You cannot use an NP-FP30 battery pack with your camcorder. (See the reverse side of the battery pack for the model number.) Installing the battery pack with excess force may lead to camcorder malfunction such as deterioration in battery pack performance or difficulty in removing the battery pack. POWER switch CHG lamp Battery pack DC IN jack DC plug Power cord To the wall outlet AC Adaptor 2 Slide the POWER switch in the direction of the arrow to set it to OFF (CHG) (The default setting). 3 Connect the AC Adaptor to the DC IN jack on the Handycam Station. Be sure that the v mark on the DC plug is facing up. DC IN jack 1 Slide the battery pack in the direction of the arrow until it clicks. 4 Connect the power cord to the AC Adaptor and the wall outlet. 17