Sony SR60 Handycam Handbook - Page 62
DISPLAY, REMAINING, REMOTE CTRL Remote control, DCR-SR60/SR80, REC LAMP Recording lamp, CAMERA DATA
UPC - 027242698970
View all Sony SR60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
CAMERA DATA Movie 60min Still image 60min 00:00:00 AWB 10/10 3SteadyShot off 4 Exposure 5White balance 6 Gain 7Shutter speed 8Aperture value 9Exposure value • appears for an image recorded using a flash (optional). • The data code is displayed on the TV screen, if you connect your camcorder to a TV. • The indicator toggles through the following sequences as you press DATA CODE on the Remote Commander: DATE/TIME t CAMERA DATA t OFF (no indication) (DCRSR60/SR80). • Depending on the hard disk condition of the camcorder, bars [--:--:--] appear. • The setting returns to [OFF] after you remove the power source for more than five minutes. DISPLAY You can select the number of thumbnails that appear on the VISUAL INDEX screen. Thumbnail 1 Glossary (p.124) B ZOOM LINK Change the number of thumbnails (6 or 12) with the zoom lever on your camcorder.* 6IMAGES Displays thumbnails of 6 images. 12IMAGES Displays thumbnails of 12 images. 62 * You can operate with the zoom buttons on the LCD frame or on the Remote Commander (DCR-SR60/SR80). REMAINING B AUTO Displays the remaining hard disk free space for about eight seconds as described below. - When your camcorder recognizes the free hard disk space, with the POWER switch is set to (Movie) - When you press DISP/BATT INFO to switch the screen display from off to on, with the POWER switch is set to (Movie) - When you start recording from the line input (DCR-SR60/SR80) ON Always displays the remaining hard disk free space indicator. • When the available free space on the hard disk of the camcorder becomes less than five minutes for movie recording, the remaining free space will be displayed all the time. REMOTE CTRL (Remote control) (DCR-SR60/SR80) The default setting is [ON] so that you can use the supplied Remote Commander (p.41). • Set to [OFF] to prevent your camcorder from responding to a command sent by other device's remote control. • The setting returns to [ON] after you remove the power source for more than five minutes. REC LAMP (Recording lamp) (DCR-SR60/SR80) The camera recording lamp will not light up during recording when you set this to [OFF]. (The default setting is [ON].)