Sony SRG120DH Technical Manual - Page 16

Initial Settings and Preset

Get Sony SRG120DH PDF manuals and user guides View all Sony SRG120DH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Basic Functions Initial Settings and Preset • The initial values are the factory settings. • When the power is turned on, this unit starts operation with the settings stored in preset1. • In "Preset 1 to 16", the items that are preserved even after the power is turned off are indicated by a circle (), and the items that are not preserved are indicated by a cross (). • When you send the CAM Memory Reset command, or select and press one of POSITION1 to 6 while pressing the PRESET button using the infrared remote commander, the selected number is set as initial value. • The preset 1 is the CAM Memory number "0" in the VISCA command. The preset 2 to 16 are the CAM Memory number "1 to 15" in the VISCA command. Mode/Position setting Pan/Tilt Position Pan/Tilt Limit Position Zoom Position D-Zoom On/Off Focus Position Focus Auto/Manual Near Limit Setting Initial settings Home position Maximum range of movement Wide end On - Auto C500 (10 cm) AF Sensitivity AF Mode AF Run Time AF Interval WB Mode WB Data (Rgain, Bgain) One Push WB Data AE Mode WD Mode Normal Normal 5 sec 5 sec Auto - - Full Auto Off Auto Slow Shutter Mode Off Shutter Position - Iris Position - Gain Position - Bright Position - Exposure Compensation On/Off Off Exposure Compensation Amount ±0 BackLight On/Off Off Aperture Level 0Ah High Resolution Mode On/Off Picture Effect High Sensitivity Mode On/Off Gamma Defog On/Off NR Level Gain Limit Low-Illumination Chroma Suppress Color Gain Off Off Off 0:standard Off 3 - 2h (Middle) 4h (100%) Color Hue IR_Receive On/Off IR_Receive Return On/Off INFORMATION DISPLAY 7h (0degrees) On Off On A circle "" in this column signifies that the data is preserved. A cross "" signifies that the data IS NOT preserved. Preset 1 Preset 2 to 16 Notes • The execution of memory to the preset is limited. • When turning the power off and on again, if you want to reflect the camera conditions and pan/tilt position that are set before the power is turned off, store the settings in preset1. • The setting or deleting of memory to/from preset1 takes approx. 2 seconds longer than other channels. • In CameraID, the data is stored regardless of the preset. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
Basic Functions
1µ
Initial Settings and Preset
• The initial values are the factory settings.
•When the power is turned on, this unit starts operation with the settings stored in preset1.
•In “Preset 1 to 16”, the items that are preserved even after the power is turned off are indicated by a circle (
), and
the items that are not preserved are indicated by a cross (
).
•When you send the CAM Memory Reset command, or select and press one of POSITION1 to 6 while pressing the
PRESET button using the infrared remote commander, the selected number is set as initial value.
•The preset 1 is the CAM Memory number “0” in the VISCA command. The preset 2 to 16 are the CAM Memory
number “1 to 15” in the VISCA command.
Mode/Position setting
Initial settings
Preset 1
Preset 2 to 16
Pan/Tilt Position
Home position
Pan/Tilt Limit Position
Maximum range of movement
Zoom Position
Wide end
D-Zoom On/Off
On
Focus Position
—
Focus Auto/Manual
Auto
Near Limit Setting
C500 (10 cm)
AF Sensitivity
Normal
AF Mode
Normal
AF Run Time
5 sec
AF Interval
5 sec
WB Mode
Auto
WB Data (Rgain, Bgain)
—
One Push WB Data
—
AE Mode
Full Auto
WD Mode
Off
Auto Slow Shutter Mode
Off
Shutter Position
—
Iris Position
—
Gain Position
—
Bright Position
—
Exposure Compensation On/Off
Off
Exposure Compensation Amount
±0
BackLight On/Off
Off
Aperture Level
0Ah
High Resolution Mode On/Off
Off
Picture Effect
Off
High Sensitivity Mode On/Off
Off
Gamma
0:standard
Defog On/Off
Off
NR Level
3
Gain Limit
—
Low-Illumination Chroma Suppress
2h (Middle)
Color Gain
4h (100%)
Color Hue
7h (0degrees)
IR_Receive On/Off
On
○
×
IR_Receive Return On/Off
Off
○
×
INFORMATION DISPLAY
On
○
×
A circle “
” in this column signifies that the data is preserved.
A cross “
” signifies that the data IS NOT preserved.
Notes
• The execution of memory to the preset is limited.
• When turning the power off and on again, if you want to reflect the camera conditions and pan/tilt position that
are set before the power is turned off, store the settings in preset1.
• The setting or deleting of memory to/from preset1 takes approx. 2 seconds longer than other channels.
• In CameraID, the data is stored regardless of the preset.