Sony SRG120DH Technical Manual - Page 26
VISCA Command/Acknowledge Protocol, VISCA interface and inquiry
View all Sony SRG120DH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
VISCA interface and inquiry CAM_VersionInq Returns information on the VISCA interface. Inquiry Inquiry Packet Reply Packet CAM_VersionInq 8X 09 00 02 FF Y0 50 GG GG HH HH JJ JJ KK FF X = 1 to 7: Address of this unit in the daisy chain (For inquiry packet) 1) Y = 9 to F: Address of this unit that issued the inquiry +8 (For reply packet) 2) 1) Locked to "X = 1" for VISCA over IP. 2) Locked to "Y = 9" for VISCA over IP. Description GGGG = Vender ID (0001: Sony) HHHH = Model ID 0511: SRG-120DH JJJJ = ROM revision KK = Maximum socket # (02) Command List VISCA Command/Acknowledge Protocol Command General Command Inquiry Command Command Cancel Command Message Reply Message 81 01 04 38 02 FF (Example) 90 41 FF (Acknowledge) +90 51 FF (Completion) 90 42 FF 90 52 FF 81 01 04 38 FF (Example) 90 60 02 FF (Syntax Error) 81 01 04 38 02 FF (Example) 90 60 03 FF (Command Buffer Full) 81 01 04 08 02 FF (Example) 90 61 41 FF (Command Not Executable) 90 62 41 FF 81 09 04 38 FF (Example) 90 50 02 FF (Completion) 81 09 05 38 FF (Example) 90 60 02 FF (Syntax Error) 81 22 FF 90 62 04 FF (Example) (Command Canceled) 90 62 05 FF (No Socket) Address Set 1) IF_Clear (Broadcast) 1) IF Clear (for device address 1) 88 30 01 FF 88 01 00 01 FF 81 01 00 01 FF (Example) 1) Not available for VISCA over IP. 88 30 02 FF 88 01 00 01 FF 90 50 FF (Completion) Comments Returns Acknowledge when a command has been accepted, or Completion when a command has been executed. Accepted a command which is not supported or a command lacking parameters. Could not accept the command as there are two commands currently being executed. Could not execute the command in the current mode. Does not return Acknowledge. Accepted an incompatible command. Returned when the command of the socket specified is canceled. Completion for the command canceled is not returned. Returned when the command of the specified socket has already been completed or when the socket number specified is wrong. The device address number plus 1 is returned. The same command is returned. Acknowledge is not returned for this command. 26