Sony SRG120DH Technical Manual - Page 18
Zoom/Focus, White Balance, Focus Direct
View all Sony SRG120DH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Zoom/Focus Mode Power On Command Power Off1) IFC2) Initializing3) Zoom Direct Focus Direct AF ON During displaying the menu Memory Recall VideoFormatChange CAM_Zoom Tele/Wide/Stop [VISCA] No No No No Yes Yes Yes4) No No CAM_Zoom Tele/Wide/Stop [Infrared Remote Commander] No No No No Yes Yes Yes4) No No CAM_Zoom Direct No No No Yes Yes Yes Yes4) No No D-Zoom Limit No No No No Yes Yes Yes4) No No CAM_Focus Far/Near/Stop [VISCA] No No No Yes No No Yes4) No No CAM_Focus Far/Near/Stop [Infrared Remote Commander] No No No Yes No No Yes4) No No CAM_Focus Direct No No No Yes Yes No Yes4) No No CAM_Focus Mode (Auto/Manual) No No No Yes No Yes Yes4) No No CAM_Focus One Push Trigger No No No Yes No No Yes4) No No CAM_Focus Infinity No No No Yes No Yes Yes4) No No CAM_Focus Near Limit No No No Yes No Yes Yes4) No No AF Sensitivity Normal/Low No No No Yes Yes Yes Yes4) No No AF Mode Norm/Interval/Zoom No No No Yes Yes Yes Yes4) No No AF Activation Time/Interval Setting No No No Yes Yes Yes Yes4) No No 1) DC power is being supplied, but the camera has been turned off by a VISCA command. 2) The period from the time IF Clear is sent, until the Reply Packet is returned. 3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently finishes the pan/tilt reset operation and stops at the Home position, until the video signal is output. Or the period from the time the CAM Power ON command is sent, until Completion is returned. 4) When the menu display is updating, operation is not possible. White Balance Basic Functions 18 Mode Command Power Off1) IFC2) Initializing3) Auto CAM_WB Auto/Indoor/Outdoor/ OnePhshWB/Manual/ATW No No No Yes CAM_WB One Push Trigger No No No No CAM_WB R(B) Gain Reset/Up/Down/Direct No No No No Indoor Yes No No Power On White balance mode Outdoor One Push Yes Yes No Yes5) No No Manual Yes No Yes ATW Yes No No During displaying the menu Memory Recall Yes4) No Yes4) No Yes4) No 1) DC power is being supplied, but the camera has been turned off by a VISCA command. 2) The period from the time IF Clear is sent, until the Reply Packet is returned. 3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently finishes the pan/tilt reset operation and stops at the Home position, until the video signal is output. Or the period from the time the CAM Power ON command is sent, until Completion is returned. 4) When the menu display is updating, operation is not possible. 5) Commands are ignored during a One Push AWB operation.