Sony SRS-XB22 Help Guide - Page 44

Set up the second speaker within 1 minute. If you do not set it up within 1 minute, the setting of the first speaker will be canceled. 4 Operate the speaker in which the (BLUETOOTH) indicator is flashing to make a BLUETOOTH connection with a BLUETOOTH device. When the (BLUETOOTH) indicator of the speaker stops flashing and lights up, the BLUETOOTH connection is established. 5 Start playback on the BLUETOOTH device, and adjust the volume to moderate level. 6 Press the -/+ (volume) buttons on one of the speakers to adjust the volume. Volume adjustment of one speaker is reflected in the other. Hint When making or receiving a call, only operate the speaker in which the (BLUETOOTH) indicator lights up. If any other BLUETOOTH device(s), such as a BLUETOOTH mouse or BLUETOOTH keyboard, is connected to the BLUETOOTH device that is connected to the speaker, there may be distorted sound or noise in the speaker output. In this case, terminate the BLUETOOTH connection between the BLUETOOTH device and other BLUETOOTH device(s). When using the Speaker Add function, the codec automatically switches to SBC. You can also operate the Speaker Add function on "Sony | Music Center." Note If you reset or initialize one of the 2 speakers while using the Speaker Add function, make sure to turn off the other speaker. If you do not turn off the other speaker before restarting the Speaker Add function, there may be problems in making a BLUETOOTH connection and outputting sound. When you make a BLUETOOTH connection by One-touch (NFC), touch the speaker in which the (BLUETOOTH) indicator flashes. The device cannot make a BLUETOOTH connection with the speaker when the (BLUETOOTH) indicator is turned off. If a portable audio device, etc. is connected to the speaker's AUDIO IN jack, the speaker automatically switches to AUDIO IN mode, and the Speaker Add function is terminated. Be sure to close the cap completely after using the ADD (Speaker Add) button. 44