Sony SRXT420 User Manual (SRX-T420 user manual) - Page 50
Installing the SRX, Controller in a Computer, for Controlling the, Projector
View all Sony SRXT420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Chapter 2 Preparations Unsuitable Conditions Do not use the projector under the following conditions. Laying the unit on its side or upside down Tilting the unit to the right or left Installing the SRX Controller in a Computer for Controlling the Projector If you install the supplied SRX Controller in a computer, you can control the projector from the computer. Avoid tilting the projector more than ± 10 degrees. Doing so may cause color shading or shorten the lamp life excessively. Blocking the ventilation holes Avoid using a thick-piled carpet or anything that covers the ventilation holes (exhaust/intake). Otherwise, internal heat may build up. For the locations of the ventilation holes (exhaust/intake), see "Location and Function of Controls" on page 46. System Requirements The following are required to operate the supplied SRX Controller. • Computer: Intel Pentium M 1.6GHz or higher, and a recommended CPU in your Operating System - Installed memory: 256 MB or more (512 MB or more recommended), and recommended memory in your Operating System - Communication: LAN (10BASE-T/100BASE-T) or COM (RS-232C) - VGA: XGA (1024 × 768) or higher - HDD: Usable memory with 15 MB or more on the built-in hard disk drive - CD-ROM drive: × 8 or faster • Operating System: Microsoft Windows XP Professional SP2 (English or Japanese version) (excluding ×64 Edition) or Microsoft Windows Vista Business (English or Japanese version) Intel and Pentium are registered trademarks of Intel Corporation in the United States and other countries. Microsoft, Windows XP and Windows Vista are registered trademarks of Microsoft Corporation in the United States and other countries. User Account Control of Windows Vista Windows Vista incorporates the User Account Control (UAC) function for improving its security level. As the SRX Controller supports the UAC function, the warning dialog of UAC may be displayed during installation or activation of application. When the warning dialog is displayed, allow execution of the application in the following procedure. Otherwise, the SRX Controller cannot be executed. When the unidentified application dialog is displayed Select "Allow" to allow execution of the application. 50 Installing the SRX Controller in a Computer for Controlling the Projector