Sony STR-DA4300ES Operating Instructions (Large File - 20.21 MB) - Page 102

Name D INPUT E AUTO F HDMI G DMPORT H COAX I TrueHD J OPT K ANALOG L DTS-HD M MULTI IN N MSTR Function Lights up constantly. One of the input indicators also lights up according to the current input. Lights up when INPUT MODE is set to "Auto." Lights up when the receiver recognizes a component connected via an HDMI IN jack. Lights up when DIGITAL MEDIA PORT adapter is connected and "DMPORT" is selected. Lights up when INPUT MODE is set to "Auto" and the source signal is a digital signal being input through the COAXIAL jack. Lights up when the receiver is decoding Dolby TrueHD. Lights up when INPUT MODE is set to "Auto" and the source signal is a digital signal being input through the OPTICAL jack. Lights up when INPUT MODE is set to "Auto" and no digital signal is being input through the COAXIAL or OPTICAL jacks, or when INPUT MODE is set to "Analog," or when the "2ch Analog Direct" is being used. Lights up when the receiver is decoding DTS-HD. Lights up when multichannel input is selected. Lights up when the receiver is decoding DTS-HD Master Audio. Name O D.RANGE P XM Q EQ R SIRIUS S D.C.A.C. T ZONE 2 U SLEEP V L.F.E. Function Lights up when dynamic range compression is activated. Lights up when XM Mini Tuner and Home Dock are connected and "XM" is selected. Lights up when the equalizer is activated. Lights up when the SiriusConnect Home tuner is connected and "SIRIUS" is selected. Lights up when auto calibration is activated. Lights up while operation in zone 2 is being enabled. Lights up when the sleep timer is activated. Lights up when the disc being played back contains an L.F.E. (Low Frequency Effects) channel and the L.F.E. channel signal is actually being reproduced, the bars underneath the letters light up to indicate the level. Since the L.F.E. signal is not recorded in all parts of the input signal the bar indication will fluctuate (and may turn off) during playback. 102GB