Sony STR-DA4300ES Operating Instructions (Large File - 20.21 MB) - Page 11

Getting Started Remote commander You can use the supplied remote RM-AAL011 to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate (page 124). RM-AAL011 Name Function A AV ?/1 (on/ standby) Press to turn on or off the audio/ video components that the remote is assigned to operate (page 124). If you press the ?/1 (B) at the same time, it will turn off the receiver and other Sony components (SYSTEM STANDBY). Note The function of the AV ?/1 switch changes automatically each time you press the input button (C). B ?/1 (on/ standby) Press to turn the receiver on or off. If ZONE 2 is selected, only the main receiver is turned on or off with this button. To turn off all components including an amplifier in zone 2, press ?/1 and AV ?/1 (A) at the same time (SYSTEM STANDBY). C Input buttons Press one of the buttons to select the component you want to use. Press a pink-labeled button after pressing SHIFT (wk). When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components (page 51). You can program the remote to control non-Sony components following the steps in "Programming the remote" (page 124). D ZONE 2 Press to enable the zone 2 operation (page 106). E TEST TONE Press to output the test tone from each speaker. F AMP Press to enable the receiver operation (page 39). G MUSIC Press to select sound field (page 65). H MOVIE Press to select sound field (page 65). continued 11GB