Sony STR-DH130 Operating Instructions - Page 20

Basic Operations Playback Input buttons To activate the muting function Press MUTING. The muting function will be canceled when you do the following. • Press the button again. • Increase the volume. • Turn off the receiver. To avoid damaging your speakers Before you turn off the receiver, be sure to turn down the volume level. , V/v/B/b AMP MENU MUTING MASTER VOL +/- 1 Turn on the connected equipment. 2 Turn on the receiver. 3 Press the input button which corresponds to the equipment you want. You can also use INPUT SELECTOR on the receiver. The selected input appears on the display panel. Note When you press TUNER, "FM TUNER" or "AM TUNER" appears for a while, and then frequency appears on the display panel. 4 Play back the source. 5 Press MASTER VOL +/- to adjust the volume. You can also use MASTER VOLUME on the receiver. Naming inputs You can enter a name of up to 8 characters for inputs (except TUNER) to appear on the display panel. It is more recognizable having the equipment named on the display than the jacks. 1 Press the corresponding input button which you want to create an index name. You can also use INPUT SELECTOR on the receiver. 2 Press AMP MENU. 3 Press V/v repeatedly to select "NAME IN", then press or b. The cursor flashes and you can enter a character. 4 Press V/v to select a character, then press B/b to move the input position backward and forward. Tips • You can select the character type as follows by pressing V/v. Alphabet (upper case) t Numbers t Symbols • To enter a blank space, press b without selecting a character. 20GB