Sony STR-DH130 Operating Instructions - Page 23

Tuner Operations Tuning to a station automatically (Automatic Tuning) 1 Press TUNER repeatedly to select the FM or AM band. 2 Press TUNING + or TUNING -. TUNING + scans from lower to higher frequency stations and TUNING - for scanning higher to lower. The receiver stops scanning whenever a station is received. Using the control buttons on the receiver 1 Turn INPUT SELECTOR to select the FM or AM band. 2 Press TUNING MODE repeatedly to select "AUTO". 3 Press TUNING + or TUNING -. In case of poor FM stereo reception If the FM stereo reception is poor and "ST" flashes on the display panel, select monaural audio to lessen the sound distortion. Press FM MODE repeatedly until the "MONO" indicator lights up on the display panel. To return to the stereo mode, press FM MODE repeatedly until the "MONO" indicator on the display panel does not light up. Tuning to a station directly (Direct Tuning) You can enter the frequency of a station directly by using the numeric buttons. 1 Press TUNER repeatedly to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Press D.TUNING. 3 Press the numeric buttons to enter the frequency. Example 1: FM 102.50 MHz • USA and Canada models only: Select 1 b 0 b 2 b 5 • Other models: Select 1 b 0 b 2 b 5 b 0 Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0 Tip Adjust the direction of the AM loop antenna (aerial) for optimum reception upon tuning to an AM station. 4 Press . If you cannot tune to a station "- - - .- - MHz" or "- - - - kHz" appears and then the screen returns to the current frequency. Make sure you have entered the right frequency. Try repeating steps 2 to 4. If you still cannot tune to a station, the frequency may not be in use in your area. 23GB