Sony STR-DH130 Operating Instructions - Page 27

Overview of the menus x BALANCE (Speaker balance) Lets you adjust the balance between left and right speakers. You can adjust from BAL. L+10 to BAL. R+10 in 1dB/step. The initial setting is BAL. 0. x NAME IN (Naming) Lets you set the name of inputs and preset stations. For details, see "Naming inputs" (page 20) and "Naming preset stations" (page 25). x AUTO.STBY (Auto Standby) Lets you set the receiver switch to standby mode automatically when you do not operate the receiver or when there is no signals input to the receiver. • STBY ON Switches to standby mode after approximately 30 minutes. • STBY OFF Does not switch to standby mode. Notes • This function does not work when TUNER input is selected. • If you use the Auto standby mode and the Sleep Timer at the same time, the Sleep Timer has priority. Using the Remote Control Reassigning the input button You can change the default settings of the input buttons to suit the equipment in your system. For example, if you connect a Blu-ray Disc player to the SAT jack on the receiver, you can set the SAT button on this remote control to control the Blu-ray Disc player. Note You cannot reassign the TUNER and PORTABLE input buttons. 1 Hold down the input button of which you want to change the assignment. Example: Hold down SAT. 2 Referring to the table below, press the corresponding button for the category you want. Example: Press 8. Now you can use the SAT button to control the Blu-ray Disc player. Menu Operations/Using the Remote Control continued 27GB