Sony STR-DH130 Operating Instructions - Page 25

Tuner Operations 5 Press . The station is stored as the selected preset number. 6 Repeat steps 1 to 5 to store another station. Tuning to preset stations 1 Press TUNER repeatedly to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Press PRESET + or PRESET - repeatedly to select the station. Each time you press the button, you can select a preset station as follows: 1 2 3 4 5 ... 27 30 29 28 You can also press the numeric buttons to enter the preset station. To tune to the selection, press . Using the control buttons on the receiver 1 Turn INPUT SELECTOR to select the FM or AM band. 2 Press TUNING MODE repeatedly to select "PRESET". 3 Press TUNING + or TUNING - to select the preset station you want. Naming preset stations 1 Press TUNER repeatedly to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Tune to the preset station you want to create an index name for (page 25). 3 Press AMP MENU. 4 Press V/v repeatedly to select "NAME IN", then press or b. The cursor flashes and you can enter a character. 5 Press V/v to select a character, then press B/b to move the input position backward and forward. You can enter up to 8 characters to name the station. Tips • You can select the character type as follows by pressing V/v. Alphabet (upper case) t Numbers t Symbols • To enter a blank space, press b without selecting a character. If you made a mistake Press B/b until the character you want to change flashes, then press V/v to select the correct character. 6 Press . The name you entered is registered. Note (Europe model only) When you name an RDS (Radio Data System) station and tune to that station, the Program Service name appears instead of the name you entered. 25GB