Sony STR-K700 Service Manual - Page 5

STR-K700 About the indicators on the display 1 23 4 5 6 7 SW LFE SP ; DIGITAL ; PRO LOGIC II DTS SLEEP OPT COAX LCR SL S SR qd qs qa MEMORY D.RANGE STEREO MONO 0 9 qf 8 Name Function Name Function A SW B LFE C SP D ;DIGITAL E ; PRO LOGIC (II) F DTS Lights up when audio signal is output from the SUB WOOFER jack. Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. Lights up when the receiver is turned on. This indicator does not light up if a headphone is connected to the PHONES jack. Lights up when Dolby Digital signals are input. Note When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is not set to "ANALOG". "; PRO LOGIC" lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. "; PRO LOGIC II" lights up when the Pro Logic II Movie/Music decoder is activated. Note Dolby Pro Logic and Dolby Pro Logic II decoding do not function for DTS format signals. Lights up when DTS signals are input. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is not set to "ANALOG". G MEMORY H Preset station indicators I Tuner indicators J D.RANGE K COAX L OPT M SLEEP N Playback channel indicators L R C SL SR S Lights up when a memory function, such as Name Input, Preset Memory , etc., is activated. Lights up when using the receiver to tune in radio stations you have preset. For details on presetting radio stations. Lights up when using the receiver to tune in radio stations, etc. Lights up when dynamic range compression is activated. Lights up when INPUT MODE is set to "AUTO" and the source signal is a digital signal being input through the COAXIAL jack, or when INPUT MODE is set to "COAX IN" . Lights up when INPUT MODE is set to "AUTO" and the source signal is a digital signal being input through the OPTICAL jack, or when INPUT MODE is set to "OPT IN". Lights up when the Sleep Timer function is activated. The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound. Front Left Front Right Center (monaural) Surround Left Surround Right Surround (monaural or the surround components obtained by Pro Logic processing) Example: Recording format (Front/ Surround): Dolby Digital 3/2.1 Sound Field: A.F.D. AUTO SW LFE LCR SL SR 5