Sony STR-K700 Service Manual - Page 9

STR-K700 Name Function S DISPLAY Press to select the information displayed on the TV screen of the VCR, satellite tuner, CD player or DVD player. T -/-- Press -/-- and TV (P) at the same time to select the channel entry mode, either one or two digits of the TV. >10/x Press to select track numbers over 10 of the VCR, satellite tuner or CD player or to select channel numbers of the Digital CATV terminal. CLEAR Press to clear a mistake when you press the incorrect numeric buttons or to return to continuous playback, etc. of the satellite tuner or DVD player. U Numeric buttons (number 5*) Press to preset/tune to preset stations or to select track numbers of the CD player or DVD player or to select channel numbers of the VCR or satellite tuner. Press 0/10 to select track number 10. Press the numeric buttons and TV (P) at the same time to select the TV channels. V 2CH Press to select 2CH STEREO mode. W A.F.D. Press to select A.F.D. mode. X AUTO CAL Press to activate the Auto Calibration function. Y TV/VIDEO Press TV/VIDEO and TV (P) at the same time to select the input signal (TV input or video input). SLEEP Press to activate the Sleep Timer function and the duration which the receiver turns off automatically. * The number 5, MASTER VOL +, TV VOL +, and H buttons have tactile dots. Use the tactile dots as references when operating the receiver. Notes Some functions explained in this section may not work depending on the model. The above explanation is intended to serve as an example only. Therefore, depending on the component, the above operation may not be possible or may operate differently than described. 9