Sony STR-KS2300 Operating Instructions - Page 23

Getting Started When you connect a DVD player or DVD recorder You can use the DVD input button on the remote to control your DVD player or DVD recorder. You may need to change the factory setting of this button depending on the remote supplied with this receiver. The factory setting for the remote is shown in the table below: Remote Factory setting RM-AAU022 DVD player (Change the factory setting if you connect a DVD recorder) RM-AAU023 DVD recorder (Change the factory setting if you connect a DVD player) To change the factory setting of the DVD input button on the remote, see "Changing button assignments" (page 63). Notes • To input multi channel digital audio from the DVD player, set the digital audio output setting on the DVD player. Refer to the operating instructions supplied with the DVD player. • To output sound from the front speakers and the subwoofer only when you select DVD input, be sure to: - connect your DVD player to the DVD COAX IN jack on the receiver. - press 2CH. • When connecting optical digital cords, insert the plugs straight in until they click into place. • Do not bend or tie optical digital cords. • Be sure to connect the video output of the DVD player, DVD recorder and VCR to the TV, so that the image is displayed on the TV. Refer to the operating instructions of each connected component for details. • You cannot do recording on the DVD recorder or VCR via this receiver. For details, refer to the operating instructions supplied with the DVD recorder or VCR. Tips • To output the sound of the TV from the speakers connected to the receiver, be sure to - connect the audio output jacks of the TV to the TV IN jacks of the receiver. - turn off the TV's volume or activate the TV's muting function. • All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies. 23GB