Sony SVR-2000 Setup Guide - Page 42

Note Antenna users: TiVo uses the channel lineup of a nearby cable system to determine which channels you receive. If there is no cable company that serves your Zip Code, enter the Zip Code of a nearby community. TiVo will automatically make sure the channel numbers are correct for the broadcast stations. Step-by-Step Instructions Guided Setup walks you through the steps necessary for your particular programming source (antenna, cable, satellite, etc.) and equipment configuration. Depending upon your program source, you may not encounter all of the Guided Setup screens. Program Source. The first step is to specify what kind of television programming source you have. If you have more than one source of programming (for example, both satellite and cable), you can choose that here. Press the UP/DOWN arrows on the Remote Control to highlight your program source(s), then press SELECT to choose that option and move to the next screen. If you have a cable A/B system, you can only pick one to watch with your SVR Recorder. See "Connecting Your Equipment" on pages 15-39 for information about splitting your signal in order to watch the other channels. Cable Box. If you chose cable as your program source, do you have a set-top cable box, or does your cable come straight out of your wall and into your TV? Satellite Connection. If you chose satellite as your programming source, did you connect the control cable to a serial jack on the back of your satellite set-top box, or did you use the IR Control cable? A serial connection is preferable, if your satellite box has a serial jack available. 42 Guided Setup