Sony TAV-L1 Operating Instructions - Page 19

Getting Started 3: Connecting a cable box/satellite receiver/VCR Rear of the system AC power cord (mains lead) (supplied) Cable box or satellite receiver Satellite antenna cord (not supplied) VCR CATV cord (not supplied) S VIDEO cord (not supplied) S VIDEO cord (not supplied) S VIDEO VIDEO (yellow) Audio/video cord (not supplied) AUDIO-L (white) AUDIO-R (red) S VIDEO VIDEO (MONO) L AUDIO R 1 3 VIDEO IN S VIDEO VIDEO (yellow) Audio/video cord (not supplied) AUDIO-L (white) AUDIO-R (red) 1 Remove the covers. When all connections have been made, replace the covers. 2 Connect your satellite receiver, VCR and cable. To connect a satellite receiver 1 Connect the satellite antenna cord (not supplied) to the satellite receiver's satellite input jack. 2 Use an audio cord (not supplied) and S video cord (not supplied) to connect the satellite receiver's AUDIO and S VIDEO output jacks to the system's AUDIO and S VIDEO input jacks (VIDEO (IN) 1 or 3). To connect a VCR and cable 1 Connect the CATV cord (not supplied) to the VCR's VHF/UHF input jack. 2 Use an audio cord (not supplied) and video cord (not supplied) to connect the VCR's AUDIO and VIDEO output jacks to the system's AUDIO and VIDEO input jacks (VIDEO (IN) 1 or 3). 3 Connect the supplied AC power cord (mains lead) to the AC IN socket on the rear of the system. Notes • Do not connect the AC power cord (mains lead) to your mains socket until all connections are complete. • If available, use an S video cord to connect your equipment. • If you connect other equipment, see page 71. Continued 19 US