Sony TAV-L1 Operating Instructions - Page 21
: Connecting the FM wire antenna, 5: Switching on the system
View all Sony TAV-L1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Getting Started 4: Connecting the FM wire antenna Connect the supplied FM wire antenna for listening to the FM radio. Thread the wire antenna through the slit of the cover, and then replace the cover. 5: Switching on the system Install this system so that the power cord can be unplugged from the wall socket immediately in the event of trouble. AC power cord (mains lead) POWER POWER VIDEO DIGITAL IN OPT DVD DIGITAL OUT FM ANTENNA COAX 75 COAXIAL FM wire antenna Notes • Be sure to fully extend the FM wire antenna. • After connecting the FM wire antenna, keep it as horizontal as possible. Tip If you have poor FM reception, use a 75-ohms coaxial cable (not supplied) to connect the system to an outdoor FM antenna as shown below. Outdoor FM antenna System VIDEO DIGITAL IN OPT DVD DIGITAL OUT FM ANTENNA COAX 75 COAXIAL 1 Connect the system to your mains socket (120V AC, 60Hz). 2 Press POWER on the system (top of the lift unit). When you switch on the system for the first time, the Language menu appears on the screen, then go to "6: Selecting the monitor language" (page 22). When the system is in standby mode (the POWER indicator on the system is off), press POWER to switch on the system. Note Depending on the LIFT MODE setting or selected input, the lift unit will move down when turning on the system. 21 US