Sony TAV-L1 Operating Instructions - Page 41

Screen menu Screen Wide Mode: 4:3 Default: Overscan: V Center: H Center: Phase: Pitch: Reset: Video 1 Wide Zoom Wide Zoom Normal 0 0 Selec t : BSacekt: Exit: MENU You can select the options listed below on the Screen menu. To select options, see "Navigating through menus" (page 38). Wide Mode Selects a Wide Mode to use for 4:3 sources. 1 Press (OK) to select [Wide Mode]. 2 Press M/m to select one of the following, then press (OK). • [Wide Zoom]: Selects to enlarge to fill screen with minimum distortion. • [Normal]: Selects to display 4:3 picture in original size when the original source is 4:3 (Standard definition source). • [Full]: Selects to enlarge the original picture horizontally to fill the screen when the original source is 4:3 (Standard definition source). When the original source is 16:9 (High definition source), select this mode to display 16:9 picture in original size. • [Zoom]: Selects to enlarge the original picture without distorting the aspect ratio. Tips • To change from one Wide Mode option to another, press WIDE. • For Wide Zoom and Zoom modes, you can adjust the vertical position of the picture. For details, see page 41. • Normal, Full1 and Full2 are available for Wide Mode when VIDEO 6 is selected. 4:3 Default Selects the default Screen mode to use for 4:3 sources. 1 Press (OK) to select [4:3 Default]. 2 Press M/m to select one of the following, then press (OK). • [Wide Zoom]: Selects to enlarge the 4:3 picture to fill the 16:9 screen, keeping the original image as much as possible. • [Normal]: Selects to return the 4:3 picture to its original size. • [Full]: Selects to enlarge the 4:3 picture horizontally only, to fill the 16:9 screen. • [Zoom]: Selects to enlarge the 4:3 picture horizontally and vertically to an equal aspect ratio that fills the 16:9 screen. Useful for watching Letterbox movies. • [Off]: Selects to continue using the current Wide Mode setting when the channel or input is changed. Tips • 4:3 Default functions only when the monitor receives 480i or 480p signals. • If 4:3 Default option is set to anything but [Off], the Wide Mode setting changes only for the current channel. When you change channels (or inputs), Wide Mode is automatically replaced with the 4:3 Default setting for 4:3 sources. To retain the current Wide Mode setting as channels and inputs are changed, set 4:3 Default to [Off]. Note This setting is not available for VIDEO 6. Overscan Allows you to adjust the viewable picture area size. 1 Press (OK) to select [Overscan]. 2 Press M/m to select one of the following, then press (OK). • [Normal]: Displays a standard size picture. • [+1]/[+2]: Allows you to adjust the viewable picture area size. This is useful for viewing ticker tape or banners at the top or bottom of the screen. Note This setting is not available for VIDEO 6. V Center (Vertical Center) Allows you to move the position of the picture up and down in the window. Available only in Wide Zoom and Zoom modes. 1 Press (OK) to select [V Center]. 2 Press M/m to choose a correction between -10 and +10, then press (OK). Tip The setting of V Center can be between -50 and +50 for VIDEO 6. Continued 41 US Using the Monitor Menu