Sony VGF-CP1 Operating Instructions - Page 54
Setting Manually, If the connection name is unnecessary to change, press
View all Sony VGF-CP1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
11 If the connection name is unnecessary to change, press on the remote control to proceed to the next step. The confirmation screen for settings appears. Hint Normally it is unnecessary to change the connection name. 12 Confirm the setting, and press on the remote control to proceed to the next step. 13 Select [Yes] by pressing on the remote control, and press (ENTER). Connection to the access point is confirmed. When connected properly, "Network connection completed" is displayed. Setting Manually If the access point device does not support AOSS, or AOSS does not work properly, set manually by the following steps. 1 Confirm the access point information. Confirm the following information. For details on the access point device (wireless LAN router), see the operating instructions supplied with the access point device, or consult the access point provider. SSID Identification for the access point. Security type Security type depends on the access point. With this unit, [None], [WEP], [WPA-PSK (TKIP)], [WPAPSK (AES)] can be selected. Encryption key WEP key or WPA key is required depending on the selected security type. 2 Display the screen below by following steps 1 to 5 in "Setting with AOSS" (page 51). 54