Sony VPL DX15 Operating Instructions - Page 24
Connecting a VCR, To connect to a video output, connector, Component output connector
UPC - 027242762039
View all Sony VPL DX15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Connecting a VCR This section describes how to connect the projector to a VCR. For more information, refer to the instruction manuals of the equipment you are connecting. To connect to a video output connector Rear To connect to a video GBR/ Component output connector Rear to INPUT A connector to AUDIO connector 2 1 to VIDEO connector to S VIDEO 2 connector to AUDIO connector 1 to video GBR/ component output to audio output (L/R) to S video output to video output to audio output (L/R) VCR A Stereo audio connecting cable (not supplied) (Use a no-resistance cable.) B Video cable (not supplied) or S-Video cable (not supplied) VCR A Stereo audio connecting cable (not supplied) (Use a no-resistance cable.) B Signal Cable (not supplied) HD D-sub 15-pin (male) ↔ 3 × phono plug Notes • Set the aspect ratio using "Aspect" on the Screen menu according to the input signal. • When you connect the projector to a video GBR output connector, select "Video GBR" or when you connect the projector to a component output connector, select "Component" with the "Input-A Signal Sel." setting on the Setup menu. 24 Connecting the Projector