Sony VPL DX15 Operating Instructions - Page 50
The Setup Menu
UPC - 027242762039
View all Sony VPL DX15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
The Setup Menu The Setup menu is used for changing the settings of the projector. Setting items Status Language Start Up Image High Altitude Mode Standby Mode Power Saving Mode Functions Initial setting • On: Displays on-screen information (menu, etc.) on On the projection screen. • Off: Turns off the on-screen displays except for the menus, message when turning off the power, and warning messages. Selects the language used in the menu and on-screen displays. Available languages are: English, Dutch, French, Italian, German, Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese, Chinese (Simplified Chinese), Chinese (Traditional Chinese), Korean, Thai, Arabic and Turkish. English • On: Displays the Start Up Image on the screen after On turning on the power. • Off: Does not displays the Start Up Image on the screen after turning on the power. Uses this item when using the projector at high Off altitudes. • On: Use this setting when using the projector at an altitude of 1,500 m or higher. • Off: Use this setting when using the projector at normal altitudes. • Standard: Lowers the power consumption in standby mode. • Low: The power consumption in standby is more lowered. Standard Selects the power saving mode. Off • Lamp Cutoff: The lamp goes off and the ?/1 key lights in orange if no signal is input for 10 minutes. The lamp lights again when a signal is input or any key is pressed. • Standby: The projector goes into standby mode and the ?/1 key lights in red if no signal is input for 10 minutes. To use it, turn on the power again. • Off: The projector does not go into power saving mode. 50 The Setup Menu