Sony VPL FX40 Operating Instructions - Page 9
Multi scan compatibility, Network presentation, Other Convenient Functions, About Trademarks - vpl
UPC - 027242693524
View all Sony VPL FX40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Overview * The optional lenses available for VPL-FE40, VPL-FX40 and VPL-FX41 equipped with a standard lens only. Center positioned lens The projector is designed to locate the lens in the center of the projector. This enables easy setup, as the lens center aligns with the center of the screen. Tilt installation (at front and rear) You can install the projector by tilting it 90 degrees at the rear or 90 degrees in front. You can use a mirror for rear projection. Direct Power On/Power Off function The AC power for the entire system can be turned on and off by means of a breaker or other switch. ID function The function allows you to adjust or control each projector individually with one Remote Commander when you use two or more projectors in one room. Simple maintenance Even when the projector is mounted on the ceiling you can change the lamp or clean the air filter easily because the replacement lamp is located at the side of the projector and the air filter is located at the front of the projector. Clean the air filter whenever you replace the lamp. System expandability using a network Connection to a LAN allows you to turn the projector on/off away from the installation location via a Web browser or to obtain projector status information such as the lamp timer. Also, this projector enables the sending of mail that contains messages on the time for replacement of the projector lamp, error occurrences, etc., to mail addresses that have been specified. Also, this projector is available for SNMP. Multi scan compatibility HDMI and 5BNC connectors The projector has the HDMI (HighDefinition Multimedia Interface) connector, digital input connector, which allows you to connect to the digital RGB equipment equipped with the HDMI output. The 5BNC input connectors allow you to connect to equipment output high-resolution signals and to connect to a computer from a long distance. Accepts various input signals The projector accepts video signals of the composite, S video and component, and can also display VGA, SVGA, XGA, WXGA, SXGA, SXGA+ and UXGA (60 Hz) signals. Network presentation Any image of a computer, if it is connected to a LAN by wired or wireless connection, can be projected by connecting a network cable to the NETWORK connector (RJ-45) of the projector. For details, refer to the "Operating Instructions for Network." Other Convenient Functions • Low fan noise makes your presentation comfortable • Twin stack installation • Security lock • Panel key lock • Easy-to-use Remote Commander that can select the input source directly • On-screen menu in 16 languages • Picture/Audio muting • Freeze • Lamp mode switching function • Low power consumption in standby About Trademarks • Adobe Acrobat is a trademark of Adobe Systems Incorporated. • Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. • Kensington is a registered trademark of Kensington Technology Group. Features 9