Sony VPL-PS10 Operating Instructions - Page 30

The INPUT SETTING Menu SIZE H Adjusts the horizontal size of the picture input from the INPUT A/B connector. The higher the setting, the larger the horizontal size of the picture. The lower the setting, the smaller the horizontal size of the picture. Adjust the setting according to the dots of the input signal. For details on a suitable value for preset signals, see page 31 (GB). SHIFT Adjusts the position of the picture input from the INPUT A/B connectors or video input connectors. H adjusts the horizontal position of the picture. V adjusts the vertical position of the picture. As the setting for H increases, the picture moves to the right, and as the setting decreases, the picture moves to the left. As the setting for V increases, the picture moves up, and as the setting decreases, the picture moves down. Use the < or , key to adjust the horizontal position and the M or m key for the vertical position. ASPECT Sets the aspect ratio of the picture. When inputting a 16:9 (squeezed) signal from equipment such as a DVD player, set this to 16:9. 4:3 : When a picture with a ratio of 4:3 is input. 16:9 : When a picture with a ratio of 16:9 (squeezed) is input. SCAN CONV (Scan converter) Converts the signal to display the picture according to the screen size. ON: Displays the picture according to the screen size. The picture will lose some clarity. OFF: Displays the picture while matching one pixel of the input picture element to that of the LCD. The picture will be clear but the picture size will be smaller. Note This item will not be displayed in the following cases. VPL-PX15/PX10: When an XGA or SXGA signal is input. VPL-PS10: When an SVGA, XGA or SXGA signal is input. Input signals and adjustable/setting items Item Video or S video (Y/C) DOT - PHASE SIZE H - SHIFT ASPECT SCAN - CONV Input signal Component Video GBR - - - - - - RGB1) - 2) : Adjustable/can be set - : Not adjustable/can not be set 1) The RGB signals of a computer 2) VPL-PX15/PX10: lower than SVGA only; VPL-PS10: lower than VGA only About the preset memory No. This projector has 37 kinds of preset data for input signals (the preset memory). The memory number of the current input signal and the signal type are displayed when the preset signal is input. This projector automatically detects the signal type. When the signal has been registered in the preset memory, a suitable picture is displayed on the screen according to the signal type. You can adjust the picture through the INPUT SETTING menu. This projector also has 20 kinds of user memories for each INPUT A/B. When an unpreset signal is input for the first time, the memory number is displayed as 0. If the input signal is adjusted in the INPUT SETTING menu, the setting made via INPUT A/B is stored. When more than 20 user memory items are registered for each INPUT A/B, the newest memory item is automatically stored over the oldest one. 30 (GB)