Sony VPL-VZ1000 Operating Instructions - Page 10

Attaching the Top Cover Attaching the Side Covers Place the top cover on the top of the unit, and align the left and right position. After attaching the top cover, place the side covers by hooking the holes of the side covers to the tabs on the side of the unit. Note Make sure that all 4 holes are hooked to the tabs. Hole Tab Using the top cover Slide the top cover by the pull on the center of the top cover. You can prevent the accumulation of dust on the projection window by closing the top cover when the unit is not in use. Notes • Do not close the top cover when turning the power on. • Use the top cover together with the side covers. • If dust is in the sliding surface, it may scratch the unit. • When removing the top cover, do not set the top cover upright. Attaching the side covers when installing the unit on a ceiling 1 Attach the strap to the side covers. Strap (supplied) 10