Sony VPL-VZ1000 Operating Instructions - Page 29
Network Features, Displaying the Control Window of the Unit with a Web Browser, Displaying the Control
View all Sony VPL-VZ1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Network Features Connecting to the network allows you to operate the following features: • Checking the current status of the unit via a Web browser. • Making the network settings for the unit. • Network monitoring and controlling with control protocol (SDAP [Advertisement], SDCP [PJ Talk], DDDP [AMX], Crestron RoomView, Control4, ADCP (Sony Advanced Display Control Protocol)). Notes • When connecting the unit to the network, consult with the network administrator. The network must be secured. • When using the unit connected with the network, access the Control window via a Web browser and change the access limitation of the factory preset values (page 30). It is recommended to change the password regularly. • When the setting on the Web browser is completed, close the Web browser to log out. • The menu displays used for the explanation below may be different depending on the model you are using. • Supported Web browsers are Internet Explorer 8/9/10/11. • The menu displays only in English. • If the browser of your computer is set to [Use a proxy server] when you have access to the unit from your computer, click the check mark to set accessing without using a proxy server. • AMX DDDP is not compatible with IPv6. • These network functions are available when the unit is turned on. 3 Start a Web browser on the computer, enter the following in the address field, then press the Enter key on your computer. http://xxx.xxx.xxx.xxx (xxx.xxx.xxx.xxx: IP address for the unit) When connecting by the IPv6 address http://[xxxx:xxxx:- xxxx] You can confirm the IP address of the unit under "Network Setting" on the Installation menu. The following window appears in the Web browser: Displaying the Control Window of the Unit with a Web Browser 1 Connect the LAN cable. LAN cable (straight type) (not supplied) LAN Connector Hub, router, etc. 2 Set the network settings for the unit using "Network Setting" on the Installation menu (page 27). Once you make the network settings, you can open the Control window only by performing step 3 of this procedure. 29