Sony VPL-VZ1000 Operating Instructions - Page 6
Connections and Preparations, Installing the Unit, Adjusting the Projection Image, Image
View all Sony VPL-VZ1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Connections and Preparations Installing the Unit The installation distance between the unit and a projection surface varies depending on the projection size. Install this unit so that it fits the desired projection size. For details on the distance between the unit and the projection surface (the projection distance) and the size of projected video, see "Installation Distance and Projection Image Size" (page 44). 1 Position the unit so that the unit is parallel to the projection surface. Top view Projection surface 2 After connecting the AC power cord to the unit, plug the AC power cord into a wall outlet. The unit goes into standby mode. Tip After connecting the AC power cord to the unit, the LED indicator may blink. You may not be able to control the unit while the indicator is blinking, but this is not a malfunction. Wait until it stops blinking. Adjusting the Projection Image Tip When adjusting the lens, each time you press the PATTERN button of the remote control or the LENS button on the unit, the lens adjustment function switches as follows. Notes • Depending on the installation location of the unit, you may not be able to control it with the remote control. In this case, point the remote control at the remote control detector of the unit. • When using a screen with an uneven surface, stripes pattern may rarely appear on the screen depending on the distance between the screen and the unit or the zooming magnifications. This is not a malfunction of the unit. • Flange Back Correction is the function to adjust the focus of the picture. As it has been optimized at the factory default, normally adjustment is not required (page 27). 1 Press the ?/1 (On/Standby) button to turn on the unit. The LED indicator lights in white. Tip The LED indicator does not light when "Illumination" is set to "Off" on the Installation menu. 2 Press the PATTERN button to display the Lens Focus adjustment window, and adjust the focus of the picture by pressing the M/m/