Sony VPL-VZ1000 Operating Instructions - Page 7
If the frame of the projection surface is rectangle and, feet, see
View all Sony VPL-VZ1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3 Check if the upper side and lower side of the picture are parallel. If not, install the unit in a position parallel to the projection surface (a=b). Image distortion Installation state to the projection surface (Top view) Image distortion Feet adjustment a b a > b Side view a b c > 90° a < b 4 Check if the lower side of the picture is horizontal. If not, use the left/right feet (adjustable) to keep the unit level. For details on adjusting the feet, see page 8. Image distortion Feet adjustment Side view Adjust the foot near the rear side so that it is longer. 5 Check if the left side and right side of the picture are vertical. If not, use the feet (adjustable) to keep the unit vertical to the projection surface. For details on adjusting the feet, see page 8. c < 90° Adjust the height with the feet near the front side. If the frame of the projection surface is rectangle and parallel to the floor, adjustment is completed. Tip If the picture remains distorted, repeat step 3 and 4. 6 Adjust the feet for preventing backlash to the floor. Note The picture may be distorted if you turn the feet for preventing backlash too much. 7 Press the PATTERN button to display the Lens Shift adjustment window, and adjust the picture position by pressing the M/m/