Sony WH-XB910N Help Guide - Page 123
Cannot hear a person during a call/low voice from callers, your voice does not reach, the person
View all Sony WH-XB910N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Help Guide Wireless Noise Canceling Stereo Headset WH-XB910N Cannot hear a person during a call/low voice from callers, your voice does not reach the person during a call/your voice is low on the caller's side. Check that both the headset and the connected device are turned on. Turn up the volume of the connected device and the volume of the headset if they are too low. When you use the video calling application, open the settings (*) of the video calling application, and check that the speaker or microphone setting is specified as [Headset (WH-XB910N Hands-Free)](**). When the settings of the video calling application cannot be checked or calling connections [Headset (WH-XB910N Hands-Free)] cannot be selected, select [Headset (WH-XB910N Hands-Free)] on the settings of your computer to make connections. * Depending on the video calling application you are using, this function may not be available. ** Names may vary according to the computer or the video calling application you are using. Use the Bluetooth device to re-establish the connection. Select HFP or HSP for the profile. If you are listening to music with the headset, stop playback and tap the touch sensor control panel twice quickly (with an interval of about 0.3 seconds) to respond to an incoming call. Reset the headset. Initialize the headset, and pair the headset and the device again. Related Topic How to make a wireless connection to Bluetooth devices Receiving a call Making a call Resetting the headset Initializing the headset to restore factory settings 5-031-015-11(2) Copyright 2021 Sony Corporation 123