Sony WH-XB910N Help Guide - Page 64
Operate the Bluetooth device to start playback and adjust the volume to a moderate level.
View all Sony WH-XB910N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Help Guide Wireless Noise Canceling Stereo Headset WH-XB910N Listening to music from a device via Bluetooth connection If your Bluetooth device supports the following profiles, you can enjoy listening to music and control the device from your headset via Bluetooth connection. A2DP (Advanced Audio Distribution Profile) You can enjoy high-quality music wirelessly. AVRCP (Audio Video Remote Control Profile) You can adjust the volume, etc. The operation may vary depending on the Bluetooth device. Refer to the operating instructions supplied with the Bluetooth device. 1 Connect the headset to a Bluetooth device. 2 Wear the headset on your ears. Adjust the length of the headband. Put the headset on your head with the (left) mark on your left ear and the (right) mark on your right ear. There is a tactile dot on the (left) mark side. Be careful not to come in contact with the touch sensor control panel when you put on the headset. A: Tactile dot B: Touch sensor control panel 3 Operate the Bluetooth device to start playback and adjust the volume to a moderate level. 4 Adjust the volume using the touch sensor control panel of the headset. Increase the volume: Swipe up repeatedly until the volume reaches the desired level. 64