Sony XAV-63 Operating Instructions - Page 61

MP3/WMA/AAC/JPEG/Xvid/MPEG-4 files do not play. • Recording was not performed according to the ISO 9660 level 1 or level 2 format or the Joliet or Romeo expansion format (DATA CD), or the UDF Bridge format (DATA DVD) (page 54). • The file extension is incorrect (page 55). • Files are not stored in MP3/WMA/AAC/JPEG/Xvid/ MPEG-4 format. • If the disc contains multiple file types, only the selected file type (audio/video/image) can be played. t Select the appropriate file type using the list (page 29). MP3/WMA/AAC/JPEG/Xvid/MPEG-4 files take longer to play than others. The following discs take a longer time to start playback. - a disc recorded with a complicated tree structure. - a disc recorded in Multi Session/Multi Border. - a disc to which data can be added. The disc does not start playing from the beginning. Resume playback or multi-disc resume playback (page 50) has taken effect. Certain functions cannot be performed. Depending on the disc, you may not be able to perform operations such as stop, search, or repeat/shuffle play. For details, refer to the manual supplied with the disc. The soundtrack/subtitle language or angle cannot be changed. • Use the DVD menu instead of the direct selection button on the remote commander (not supplied) (page 16). • Multilingual tracks, multilingual subtitles, or multiangles are not recorded on the DVD. • The DVD prohibits changing. The operation buttons do not function. The disc will not eject. Press the reset button (page 13). USB playback Items cannot be played via a USB hub. This unit cannot recognize USB devices via a USB hub. Items cannot be played. Reconnect the USB device. The USB device takes longer to play. The USB device contains large-sized files or files with a complicated tree structure. A beep sounds. During playback, the USB device has been disconnected. t Before disconnecting a USB device, make sure to stop playback first for data protection. The sound is intermittent. The sound may be intermittent at a high bit rate of more than 320 kbps. Bluetooth function (XAV-64BT) The other Bluetooth device cannot detect this unit. • Set "Signal" to "ON" (page 37). • While connecting to a Bluetooth device, this unit cannot be detected from another device. Disconnect the current connection and search for this unit from the other device. The disconnected device can be reconnected by selecting from the list of registered devices. This unit cannot detect the other Bluetooth device. Check the Bluetooth setting of the other device. Connection is not possible. • Depending on the other device, searching from this unit may not be possible. t Search for this unit from the other device. • Depending on the status of the other device, searching from this unit may not be possible. t Search for this unit from the other device. • Check the pairing and connection procedures in the manual of the other device, etc., and perform the operation again. The name of the detected device does not appear. Depending on the status of the other device, it may not be possible to obtain the name. There is no ringtone. • Raise the volume while receiving a call. • Depending on the connecting device, the ringtone may not be sent properly. t Set "Ringtone" to "Default" (page 37). The talker's voice volume is low. Raise the volume during a call. The other party says that the volume is too low or high. Adjust the "MIC Gain" level (page 36). Echo or noise occurs during call conversations. • Reduce the volume. • "EC/NC Mode" is set to "Mode 1." t Set "EC/NC Mode" to "Mode 2" (page 37). • If ambient noise other than the phone call sound is loud, try reducing this noise. t Shut the window if road noise is loud. t Lower the air conditioner if the air conditioner is loud. The phone sound quality is poor. Phone sound quality depends on reception conditions of the cellular phone. t Move your car to a place where you can enhance the cellular phone's signal if the reception is poor. The volume of the connected Bluetooth device is low or high. Volume level will differ depending on the Bluetooth device. t Reduce the volume level differences between this unit and the Bluetooth device (page 37). No sound is output during audio streaming. The connected Bluetooth device is paused. t Cancel pause of the Bluetooth device. 61