Sony XBR-55X800B Operating Instructions (Large File - 16.5 MB) - Page 20

Recommended Measures to Secure the TV Consider the following measures when securing your TV to a Stand (not supplied). 1 Secure the Stand for the TV. Make sure the Stand can adequately support the weight of the TV. Use two angle braces (not supplied) to secure the stand. For each angle brace use the appropriate hardware to: • Attach one side of the angle brace to the wall stud. • Attach the other side to the Stand. Angle brace (not supplied) Stand 2 Secure the TV to the Stand. Use the optional hardware listed as follows (not supplied): • M4 machine screw (screwed into the TV's rear cover) • A screw or similar (attach it to the Stand) • Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slack in the rope or chain. Screw hole on the rear cover M4 machine screw (not supplied) Rope or chain (not supplied) The length of the M4 machine screw differs depending on the rope or chain diameter. Please see below illustration. 8-12 mm Screw M4 Rope or chain TV's rear cover 3 Anchor the TV to the wall by using bolts, wall anchor and chain (or rope). M6 eye bolts (not supplied) Wallmount holes Rope or chain (not supplied) Wall-anchor (not supplied) Please see below illustration for M6 eye bolt length. 8-12 mm M6 eye bolt TV's rear cover 20 US Screw (not supplied)