Sony XNV-770BT Operating Instructions - Page 17
Basic Operations, Using the navigation function, To switch to the current audio/video source - navigation system
UPC - 027242808836
View all Sony XNV-770BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Basic Operations Using the navigation function 1 Connect the navigation module to the car dock. For details, see the supplied installation/connection manual. 2 Press (TOP), then touch in the top ATT Top menu. The display to select the view mode appears. The view mode options are as follows. "Navigation Only": Shows the navigation display only. "Dual Screen Navi + A/V (Large)": Shows the current audio/video source on the navigation display. "Dual Screen Navi + A/V (Small)": Shows the key of the current audio/video source on the navigation display. Navigation Only 15 Dual Screen Navi + A/V (Large) Dual Screen Navi + A/V (Small) 12:00 3 Touch the desired view mode. When selecting "Navigation only" The navigation display appears, and you can then use the navigation function. When selecting "Dual Screen Navi + A/V (Large)" or "Dual Screen Navi + A/V (Small)" The display to select the position of the audio/ video source and keys appears. 1 Touch the desired position. 2 Touch the display in the navigation area. The audio/video source and keys disappear, and you can then use the navigation function. Upper Left Upper Right Back Select screen position. Lower Left Lower Right For further details on navigation operation, refer to the leaflet (supplied by TomTom) for the navigation module. Notes • During navigation operation, operation sound is not output even if "Beep" is set to "ON." • The navigation operation cannot be performed by the card remote commander. • The voice guidance volume is independent of the regular volume. To switch to the current audio/video source Press and hold (TOP). To switch back to the navigation mode, press and hold (TOP). When "Dual Screen Navi + A/V (Large)" or "Dual Screen Navi + A/V (Small)" is selected as a view mode You can also switch to the current audio/video source by the following method. For "Dual Screen Navi + A/V (Large)," touch the audio/video source area. For "Dual Screen Navi + A/V (Small)," touch . To switch back to the navigation mode, touch "Navi" in the reception/playback display. continue to next page t 17