Sony XNV-770BT Operating Instructions - Page 70

Disc operation The disc cannot be loaded. • Another disc is already loaded. • The disc has been forcibly inserted upside down or in the wrong way. The disc does not play back. • Defective or dirty disc. • The disc is not applicable. • The DVD is not applicable due to the region code. • The disc is not finalized (page 63). • The disc format and file version are incompatible with this unit (page 10, 63). • Press Z to remove the disc. MP3/WMA/AAC/JPEG/MPEG-4 files do not play back. • Recording was not performed according to the ISO 9660 level 1 or level 2, the Joliet or Romeo in the expansion format (DATA CD), or the UDF Bridge format (DATA DVD) (page 63). • The file extension is incorrect (page 64). • Files are not stored in MP3/WMA/AAC/JPEG/ MPEG-4 format. • If the disc contains multiple file types, only the selected file type (audio/video/image) can be played. t Select the appropriate file type using the list (page 36). MP3/WMA/AAC/JPEG/MPEG-4 files take longer to play back than others. The following discs take a longer time to start playback. - a disc recorded with a complicated tree structure. - a disc recorded in Multi Session/Multi Border. - a disc to which data can be added. The disc does not start playing from the beginning. Resume playback or multi-disc resume playback (page 59) has taken effect. Certain functions cannot be performed. Depending on the disc, you may not be able to perform operations such as stop, search, or repeat/shuffle play. For details, see the manual supplied with the disc. The soundtrack/subtitle language or angle cannot be changed. • Use the DVD menu instead of the direct selection button on the card remote commander (page 20). • Multilingual tracks, multilingual subtitles, or multi- angles are not recorded on the DVD. • The DVD prohibits changing. The operation buttons do not function. The disc will not eject. Press the reset button (page 16). You forgot the password for parental control. Enter "5776" in the password input display to unlock (page 27). USB playback Cannot play back items via a USB hub. This unit cannot recognize USB devices via a USB hub. Cannot play back items. Reconnect the USB device. The USB device takes longer to play back. The USB device contains large-sized files or files with a complicated tree structure. A beep sounds. During playback, the USB device has been disconnected. t Before disconnecting a USB device, make sure to stop playback first for data protection. The sound is intermittent. The sound may be intermittent at a high-bit-rate of more than 320 kbps. Bluetooth function The other Bluetooth device cannot detect this unit. • Set "Signal" to "ON" (page 47). • Set "Discoverable" to "Show" (page 47). • While connecting to the other Bluetooth device, this unit cannot be detected from another device. Disconnect the current connection and search for this unit from another device. The disconnected device can be reconnected by selecting from the list of registered devices. This unit cannot detect the other Bluetooth device. Check the Bluetooth setting of the other device. Connection is not possible. • Depending on the other device, searching from this unit may not be possible. t Search for this unit from the other device. • Depending on the status of the other device, searching from this unit may not be possible. t Search for this unit from the other device. • Check the pairing and connection procedures in the manual of the other device, etc., and perform the operation again. The name of the detected device does not appear. Depending on the status of the other device, it may not be possible to obtain the name. No ring tone. • Raise the volume while receiving a call. • Depending on the connecting device, the ring tone may not be sent properly. t Set "Ringtone" to "Default" (page 47). The talker's voice volume is low. Raise the volume during a call. The other party says that the volume is too low or high. Adjust the "MIC Gain" level (page 42). 70