Sony XNV-770BT Operating Instructions - Page 54
Rotary Commander, AUX1 Input, No Signal, Camera Input, Rear View Camera Setting, Monitor Angle, Option - with rear view camera
UPC - 027242808836
View all Sony XNV-770BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Item Option Rotary Commander Default (z) Changes the operative direction of rotary commander controls. Reverse AUX1 Input (page 61) Sets the type of device connected to the AUX1 IN terminals to switch the background screen accordingly. Video (z) Audio OFF AUX2 Input* (page 61) Sets the type of device connected to the AUX2 IN terminals to switch the background screen accordingly. Video (z) Audio OFF No Signal Changes the screen automatically when no external video signal is detected. Through Blank (z) Camera Input OFF Activates the video input from the connected rear view ON (z) camera. Rear View Camera Setting - (page 62) Monitor Angle - (XNV-770BT only) (page 50) Purpose To use in the factory-set position. To use on the right side of the steering column. To show the picture from the connected device. To show this unit's background screen. To deactivate the AUX input. To show the picture from the connected device. To show this unit's background screen. To deactivate the AUX input. To show the no signal screen. To show the audio playback screen with no signal notification. To deactivate the input. To show the picture from the rear view camera when the back lamp lights up (or the shift lever is set to the R (reverse) position). - - Unit status Any status. Unit off. Unit off. Unit off. Any status. Any status. Any status. * When a device is connected to BUS CONTROL IN, "Sony BUS Input" appears instead of "AUX2 Input," and only options "Video" and "Audio" are selectable. 54