Sony XR-65X90K Wall-Mount Bracket - Page 9
Preparing for the Installation, of the TV or LCD Display
View all Sony XR-65X90K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5 Install WM4 on the wall. 8 WM1 × 2 WS2 WW1 WM4 WW2 WS1 Note ˎˎUse a level to check whether WM4 is level. 9 Pull out the arm of the bracket to the end. Precaution ˎˎDo not over-tighten the lag bolts WS2 . Improper tightening could reduce the holding power of the US lag bolts WS2 . 6 Drill lower pilot holes on the marks. (Refer step 4 for the drill instruction.) × 2 7 Fit the screws and spacers to the holes. WM4 Preparing for the Installation of the TV or LCD Display Note ˎˎBe sure to store the removed screws and unused parts in a safe place, keeping them away from children. × 2 WW1 WS2 Note ˎˎUse a level to check whether WM4 is level. 1 Attach the Table-Top Stand to make the TV or LCD Display standing. • Refer to your TV's or LCD Display's Setup Guide. − 9 (US) −