Stihl FB 131 Instruction Manual - Page 16

Adjusting Depth of Cut, Redefining bed edges

Get Stihl FB 131 PDF manuals and user guides View all Stihl FB 131 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

English attachment to the rear. Maintain a safe distance from the cutting attachment at all times. Adjusting Depth of Cut Redefining bed edges 9924BA031 KN 21 A N To reduce the risk of accidents, shut off the engine and wait until the cutting attachment comes to a standstill. N Loosen the wingnut (1) counterclockwise. N Push wheel (2) upwards to increase the depth of cut (A) or downwards to reduce the depth of cut (A). 9924BA004 KN 3 A 9924BA005 KN The depth of cut (A) depends on the uneveness of the ground, your height and normal working position. Therefore: N move the wheel (2) so that the blade (3) touches the ground in the normal working position. 1 The arrow (1) on the deflector indicates the direction of operation. The deflector is set at the factory with its open side facing away from the operator. This ensures that cuttings and other debris are directed away from the power tool and operator. 9924BA006 KN 9924BA023 KN N Tighten down the wingnut clockwise. N Starting the Engine N Start the cut at no less than half throttle and continue cutting at full throttle. 14 FB 131

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
FB 131
English
14
attachment to the rear.
Maintain a
safe distance from the cutting
attachment at all times.
Adjusting Depth of Cut
N
To reduce the risk of accidents, shut
off the engine and wait until the
cutting attachment comes to a
standstill.
N
Loosen the wingnut (1)
counterclockwise.
N
Push wheel
(2) upwards to increase
the depth of cut
(A) or downwards to
reduce the depth of cut (A).
The depth of cut (A) depends on the
uneveness of the ground, your height
and normal working position. Therefore:
N
move the wheel (2) so that the
blade (3) touches the ground in the
normal working position.
N
Tighten down the wingnut
clockwise.
Redefining bed edges
The arrow (1) on the deflector indicates
the direction of operation.
The deflector is set at the factory with its
open side facing away from the
operator. This ensures that cuttings and
other debris are directed away from the
power tool and operator.
N
Starting the Engine
N
Start the cut at no less than half
throttle and continue cutting at full
throttle.
1
A
9924BA004 KN
2
3
9924BA005 KN
A
9924BA006 KN
9924BA031 KN
1
9924BA023 KN