Stihl FC 70 Product Instruction Manual - Page 21
Starting / Stopping the, Engine
View all Stihl FC 70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Opening the threaded filler cap Starting / Stopping the Engine Controls 31 Starting the engine English 4 547BA015 KN 002BA447 KN 0815BA001 KN N Turn the cap counterclockwise until it can be removed from the tank opening. N Remove the filler cap. Refueling Take care not to spill fuel while fueling and do not overfill the tank. STIHL recommends use of the STIHL filling system (special accessory). Closing the threaded filler cap 2 1 Throttle trigger lockout 2 Throttle trigger 3 Stop switch with Run and 0 = Stop positions. Function of stop switch and ignition system The stop switch is normally in the Run position: Ignition is on in this position - the engine is ready to start and may be started. If the stop switch is moved to the 0 position, the ignition is switched off. It is automatically switched on again after the engine comes to a standstill. N Press the fuel pump bulb (4) at least five times - even if the bulb is already filled with fuel. Cold engine (cold start) 5 N Press in the choke lever (5) and turn it to g at the same time. Warm engine (warm start) 547BA016 KN 002BA448 KN N Position cap. N Turn the cap clockwise as far as it will go and tighten it as securely as possible by hand. FC 70 C 5 N Press in the choke lever (5) and turn it to < at the same time. 19 547BA017 KN