Stihl FC 70 Product Instruction Manual - Page 28
Replacing the Depth Wheel, Replacing the Skirt
View all Stihl FC 70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
241BA017 KN English Replacing the Depth Wheel Replacing the Skirt Fitting the skirt Have a worn depth wheel replaced by a servicing dealer. STIHL recommends that you have servicing and repair work carried out exclusively by an authorized STIHL servicing dealer. Depth wheel 1 2 N The end of the thread on the screw (1) is caulked to ensure that the wingnut (2) does not work loose and be lost. A very high torque has to be applied to remove the wingnut from the screw. If the parts are then reassembled, the captive function is no longer guaranteed. In such a case have the screw and wingnut replaced by a servicing dealer. 241BA024 KN Removing the skirt 1 23 4 N Loosen and remove the screw (1). N Remove the washer (2). N Pull the skirt (3) off the lug (4) and out of the deflector. Position of skirt 53 N Position the skirt (3) correctly in relation to the depth wheel (5): The wheel is on the left - the skirt must project to the right. 241BA015 KN 241BA009 KN 3 4 N Push the skirt (3) into the slot in the deflector until it can be engaged on the lug (4). N Fit the washer on the screw. N Insert the screw and tighten it down firmly. 26 FC 70 C